Tag Archives: leafmould

Making leaf mould

The last few days has seen a massive leaf drop here so that means it is time to make leaf mould. Collecting leaves and making amazing soil conditioner for next year really does mark the changing seasons.

The common advice is to use a container made from chicken wire strung around four wooden poles which are knocked into the ground. Like many other pieces of received gardening wisdom it is not the best way. The problem is that the leaves at the edges dry out which really slows down the fungal rotting process.

Over the years I tried several different methods and found the easiest and cheapest was to use builder’s big bags, or bulk bags, that are used to deliver sand and gravel. The advantages are that they are free and stop the wind from drying out the contents.

The other solution is to line a chicken wire container with cardboard.

Do not cover the top. Leaf mold is a fungal process which needs to be wet all the time.

Here is a video Monty Don making leaf mould on a large scale.

There is no need to use any of the magic additives on the market or to add anything other than leaves. You can shred them if you wish, and that certainly speeds up the rotting process, but just plain old leaves in a big bag are all you need.

There is also a lot of discussion about how long it takes for the leaves to rot down. Some say 2-3 years but I usually get usable leaf mold in 12-18 months. It depends on the leaves as some rot faster than others.

Now is also a good time to use leaf mold on the garden. Spread a 50mm (2 inch) layer over beds to stop winter rain compacting the soil. Do not worry if the leaves are not totally rotted as worms will help incorporation and rotting will continue over winter. By next spring you will have a bed of wonderful soil ready for sowing.

You can also use it as part of a home made potting compost mix. Note: leaf mold does not contain any nutrients.

Updated 02 October 2019